Gigaset Fusion Manual page 34

Call divert
Setting up Call divert
In Web user interface
Settings
click Enable the required divert (Always / On Busy / When no answer) with the switch
( = enabled) . . . The Target list shows suitable divert destinations
(Phone number / DECT handset / Group / Fusion base)
selected destination or select from list
When no answer: The call is diverted to the specified number if it is not accepted within the time
entered in Delay.
Select time from Delay list
Show Call divert for connections and call groups in the phone display menu:
Enable/disable function with the switch next to Show (
listed under Settings
Save settings: Save
Enabling/disabling and editing Call divert
In display menu
Call divert is set up in the Web user interface. For Call divert for connections and call
groups, the Divert displayed on phone interface option is enabled for the device.
Settings
or
Open Quick access
Select device . . . Call diverts (Always / When busy / No Answer) are displayed
disable required Call divert with the switch (
and/or corresponding number
In Web user interface
Settings
click Enable/disable required Call divert (Always / When busy / When no answer) with
the switch ( = enabled)
Save
34
Telephony Call diverts
Telephony Call divert
Telephony
Touch and hold Divert Calls Always
Save
Telephony Call diverts
If required, change Target and/or corresponding number
Next to a device, connection or call group,
Enter number depending on
= enabled) . . . Call divert is
Call divert
= enabled) If required, change Target
Next to a device, connection or call group,
Select destination
Enable/