Troubleshooting Guide - Heinner HMFR-3006TFSS Instruction Manual

www.heinner.com
VIII. TROUBLESHOOTING GUIDE
Problem
The appliance
It is not plugged into the
dose not come
mains socket.
on
Milk is not Milk is warm or too hot to
foaming?
Milk is not
heating?
1.Frothing whisk is not placed
Frothing whisk correctly.
is not moving or 2.Take out the frothing whisk
is dislodged during working.
3.Ingredients
added too quickly.
Possible Cause
foam.
/
have been
500W, 50/60Hz, 220-240V
Solution
Plug into the mains.
1.Use the milk at refrigerator temperature.
2.Do not use fresh milk, low-fat milk and skimmed
milk, Whole milk has better milk froth and lasts
longer.
3.Do not re-foam already heated milk.
4.Try reducing the quantity of milk in the milk jug.
1.Ensure the milk jug is correctly positioned onto the
power base.
2.Ensure that the milk frother has been properly
turned on.
1.Stop operation.
2.Remove liquid from milk jug.
3.Place the frothing whisk inside the milk jug before
turning on the milk frother.
4.Refill milk jug with liquid.
5.Start frothing. Add ingredients(if desired) slowly
and in small quantities after the milk has already
started frothing.
21