Using Instructions - Heinner HMFR-3006TFSS Instruction Manual

www.heinner.com
VI. USING INSTRUCTIONS
1. After connecting the power, the buzzer will sound one time with white LED light. It
will be ended if there is no operation after 5 mins, the instruction light flashing 3
seconds with 3 beeps, then the light off.
2. If you force the power off when it is working and re-connecting the power later, it
will be a beep and the white LED light which mean the machine is stand-by.
3. If the NTC did not be installed during the production, the white LED light will be
flashing while the buzzer will be beeping after connecting the power.
4. The LED light will turn into white from blue, stop working and a beep when you
switch the mode during working.
Hot thick milk foam
1. Turn the knob to the "
push-dial in the middle of the knob, the buzzer beep once with the blue indicator
light, the motor and heater will start to work. The motor and heat pipe stop while
the liquid temperature reach to 55-73 degrees. In parallel the buzzer beep once
and the indicator light turns blue into white. The indicator light will keep flashing 3
seconds with beeping three times and stop after 5 minutes of non-use, then the
light off.
2. Click the start/stop button in the middle of the knob when the machine is working.
One beep every time you click the button and the corresponding color of the
instruction light will be changed. If you choose working, then it will work according to
the mode you choose. If you choose standby, the instruction light will be flashing 3
seconds while is beeping 3 times if there is no operation in 5 mins, then the light off.
Cold milk foam
1. Turn the knob to the "
of the knob, the buzzer will beep with blue LED light, the motor begins to work.
The motor will end up the work after 2 mins and the LED light will turn into white
from blue. the instruction light will be flashing 3 seconds while is beeping 3 times if
there is no operation in 5 mins, then the light off.
2. Click the start/stop button in the middle of the knob when the machine is working.
One beep every time you click the button and the corresponding color of the
instruction light will be changed. If you choose working, then it will work according to
the mode you choose. If you choose standby, the instruction light will be flashing 3
seconds while is beeping 3 times if there is no operation in 5 mins, then the light off.
/Hot thin milk foam
" or " "symbol mode. Press the START/STOP
(stirring without heating)
" symbol mode. Click the start/stop button in the middle
500W, 50/60Hz, 220-240V
(heating and stirring)
18