Table of Contents
Advertisement
Operator's Manual Simple AFG Application
8. To stop the generation, press the Stop button on the master device;
9. To unlink the instruments, slide the Release switch on the master device. In this way the two
devices can be independently controlled by their respective interfaces.
Master Multi-Instrument Bar
The Multi-Instrument toolbar will appear on the Master device when it detects the connection with
other T3AWG-3358/3258 units via the Sync cable:
The description of these symbols is summarized in the following table:
It indicates that the instrument is the Master. It is
the first device of the chain and it can control the
generation of all the connected devices.
It indicates that no other device has been found
backward on the device chain. It will appear only
on the master instrument.
86
Advertisement
Table of Contents
