Teledyne T3AWG3K Series Operator's Manual page 84

Operator's Manual Simple AFG Application
Once all the instruments have been connected, turn them on and launch the Simple AFG Application in
all the instruments.
Please note that:
•
Turn off the instruments before connecting or disconnecting the Sync Cables
•
The external clock source and external trigger input are available in Master device only
The following steps describe the operations that you should perform to set up a multi-Instrument
system and start the generation of two devices.
1. On Master and Slave units, launch the Simple AFG Application.
2. On the Master unit (the one with the Sync OUT port connected) will appear a new Master
Multi-instrument bar:
3. On the Slave unit (the one with the Sync IN port connected) will appear a new Slave Multi-
instrument bar:
84