Teledyne T3AWG3K Series Operator's Manual page 34

Operator's Manual Simple AFG Application
As you can see in the previous figure, the panel is divided in two areas, on top there is the command bar
while the rest of the area is employed by the graph. The Waveforms on the graph can be represented
with Samples Scale or Times Scale, you can zoom into area using two fingers as multitouch to zoom in
and out, one finger to translate window zoom left or right, otherwise you can select a rectangle area if
the correct button is enabled. Every time that you Zoom In, will be add to a stack the previous value of
Zoom and will be show two buttons, "Reset" and "Back" in the command bar, these buttons permit you
to come back the previous values or set the default value state of the waveform with zoom at 100%.
34