Teledyne T3AWG3K Series Operator's Manual page 35

Hide thumbs Also See for T3AWG3K Series:

Table of Contents

Operator's Manual Simple AFG Application

Below the description of the command bar:

1. Go To: If you are in Samples Scale, you can insert in the textbox the sample that you want to go

and the graph will move the actual window zoom to that sample, at same way if you are in

Times Scale, but you must insert a time value. The range of the Samples Scale is 0 to 16384,

while the Time Range depends of the values set on the Channel Data.

2. ALL CH: enable or disable the View All Channels.

You can decide to View only the channels that you want tapping on coloured buttons under the

graph.

3. Times Scale: if enabled the Times Scale is visible, otherwise Samples Scale by default.

Table of Contents

T3awg325x T3awg335x