Carrying Out The Mixing Process; Starting The Mixing Process; Pausing, Stopping, Or Canceling The Mixing Process; Processing Messages - Sartorius Flexsafe Pro Operating Instructions Manual

Operation
44 Operating Instructions Flexsafe
8.9

Carrying Out the Mixing Process

8.9.1

Starting the Mixing Process

Procedure
If the "Mixing with recipe" or "Manual mixing" operating mode is
t
selected: Press the [Start] button.
If the "Remote mixing" operating mode is selected: Start the mixing
t
process on the remote control unit (see the remote control unit
instructions).
The remaining time or the elapsed time for the mixing process or for a
y
phase in a mixing process is displayed.
8.9.2

Pausing, Stopping, or Canceling the Mixing Process

Procedure
If the mixing process in the "Mixing with recipe" or "Manual mixing"
t
operating mode needs to be paused or stopped: Press the [Pause] or
[Stop] button.
If the mixing process in the "Remote mixing" operating mode needs to
t
be paused: Pause the mixing process on the remote control unit (see the
remote control unit instructions).
If the mixing process has been stopped:
t
The [Stop mixing] display appears.
y
To confirm the process: Press the [YES] button.
t
The [Separate motor] display appears. The device must be decoupled
y
from the Palletank
®

8.10 Processing Messages

If faults occur during the mixing process when coupling or decoupling the
device to | from the impeller and Palletank
in the status bar and the device gives off an acoustic signal.
Messages must be confirmed. All processes carried out on the device are
interrupted until the messages are confirmed.
Requirements
An error message or warning message is displayed in the status bar.
Pro Mixer Drive Unit
®
for Mixing.
for Mixing: A message appears
®