Creating Users; Changing Users - Sartorius Flexsafe Pro Operating Instructions Manual

Settings
Access level: Admin
DD.MM.YYYY HH:MM:SS
User administration
User Password Group
Admin Administrator group
Operator Users
supervisor Group
PLC User Unberechtigt
Settings
User administration
User Password
Admin
Operator
supervisor
PLC User
Group
Admin
Operator
supervisor
7.3.3

Creating Users

Procedure
In the list of saved users, hold down the [List down] button until the end
t
of the list is reached.
Double click in the empty row.
t
Logoff time
A new entry is created.
y
7.3.4

Changing Users

The users classed as "supervisor" and "Operator" come pre-installed with
standard passwords. We recommend that you change these standard
passwords:
− Standard supervisor password: 1111
− Standard operator password: 0000
Procedure
If a saved user needs to be changed, e.g. the password for the user:
t
Click on the corresponding user entry, e.g. on the [Password] table
t
cell.
The table cell is selected.
y
Group Press the entry again.
t
The keypad appears.
y
Administrator gr
Users
Change the value in the entry field (for setting options, see Chapter
t
Supervisor
"7.6.3 Parameters in the "Settings" | "Access level" Menu",
Unauthorized
page 38).
If the user group for an entry needs to be changed:
t
Press the [Group] table cell for the user.
t
The [Group] table cell is marked and an arrow symbol appears in the
t
table cell.
Click on the arrow symbol.
t
A drop-down list is opened.
y
Select the desired user group. To do this, click on the user group
t
button, e.g. the [Operator] button.
To close the drop-down list: Click on the arrow symbol.
t
Operating Instructions Flexsafe
System Settings
Pro Mixer Drive Unit
®
35