Mixing Mode With Pipetting Or Diluting - Sartorius ePET User Manual

7.6. Mixing Mode with Pipetting or
Diluting (*)
In the Mixing Mode, the piston is automatically
moved up and down to mix the liquid in the
delivery vessel. The mixing time is controlled by
the START button.
M
1. Use to select either
display.

2. Press to switch on mixing. The display
should show either
NOTE:
Pressing
on and off.
3. Confirm the mode change by pressing
For Pipetting:

1. Press to increase, and
E
2. Press to confirm selection.
3. Position the tip to aspirate and press START
button.
4. Position to dispense and press the START
button.
For Diluting:
1. Select the desired diluent volume (volume 1)

by using
2. Confirm selection by pressing

3. Press or
(volume 2) .
4. Confirm selection by pressing
5. Position the tip to aspirate volume 1, and
press the START button.
6. With the tip in the air, press the START
button to aspirate air for an air gap.
7. Position the tip to aspirate volume 2 and
press the START button.
8. Finally, position the tip to dispense and press
the START button.
12
12
or

will alternately switch mixing


or .

to select the sample volume
or on the
.
E
to decrease.
E
.
E
.
.