Setting Network And Snmp Parameters; Network Parameters - Transition Networks StackMaster SMHB-E-FL-12 User Manual

Setting Network and SNMP Parameters

MANAGEABLE HUB
SNMP Network Management is configured by setting network and SNMP
parameter values.

Network Parameters

To set the Network parameter values at an attached terminal:
1. At the StackMaster™ Configuration Main Menu MAIN> prompt,
type and enter:
MAIN> i p
The StackMaster™ Network Parameters Menu comes up:
Network Parameters Menu
ipaddr = 192.251.144.253
submask = 255.255.255.0
router = 0.0.0.0
Select a parameter [main ==> root menu OR ? ==> help]
IP>
2. Referring to the Site Configuration Data Sheet (See 2.3), type and
enter modified configuration values in the format:
IP > < p a r a m e t e r > = < v a l u e >
3. Verify the modified configuration values by bringing up the same
menu:
IP > i p
The menu is redisplayed with the modified values.
4. Save the configuration values to non-volatile memory by typing
and entering:
IP>
IP>
IP>
The StackMaster™ restarts and the parameter values entered are written to
non-volatile memory.
3. INSTALLATION
name = NONE
domain = NONE
nameserver= 0.0.0.0
save
r e s t a r t
q u i t
3-21