3.9 Installing the printer driver
The procedure for installing the printer driver is explained below.
Install the printer driver after connecting the printer to your computer.
This printer has a floppy disk drive that can read floppy disks made by the following operating system
• Ωινδοωσ 95/98
• Ωινδοωσ ΝΤ4/2000
Σεε ονε οφ τηε φολλοωινγ σεχτιονσ, δεπενδινγ ον τηε ΟΣ οφ ψουρ χοµπυτερ.
• Ωινδοωσ 95/98:
3.9.1 Ινσταλλινγ τηε δριϖερ φορ Ωινδοωσ 95/98
• Ωινδοωσ ΝΤ4/2000:
TIP
•
Σεε τηε φολλοωινγ φιλεσ ιν τηε φλοππψ δισκ φορ ινφορµατιον
• Ονλινε ηελπ
• Ρεαδµε φιλε
•
Τηε λατεστ ϖερσιον οφ τηε πριντερ δριϖερ χαν βε δοωνλοαδεδ φροµ ουρ ηοµε παγε.
3.9.1 Installing the driver for Windows 95/98
Follow the steps below to install the printer driver to your computer.
1. Turn the printer on.
2. Turn your computer on.
3. After checking that your computer has started
normally, insert the floppy disk labeled "RJ-
8000 Printer Driver for Windows 95/98" into
the floppy disk drive of your computer.
4. Double click the My Computer icon, Printers,
then Add Printer.
• Αδδ Πριντερ Ωιζαρδ σταρτσ.
5. Χλιχκ Νεξτ.
• Τηε νεξτ σεττινγ ωινδοω αππεαρσ.
3.9.2 Ινσταλλινγ τηε δριϖερ φορ Ωινδοωσ ΝΤ4/2000
αβουτ τηε φυνχτιονσ ανδ ρεστριχτιονσ οφ τηε πριντερ δριϖερ.