Basic Package - Nakanishi COMBOX-NET.EIP Operation Manual

 Do not place the COMBOX-NET.EIP near any source of heat. The temperature inside the COMBOX-NET.EIP may rise and
cause a malfunction.
 When operating the switches of the COMBOX-NET.EIP, do not apply excessive force. Doing so may cause a malfunction.
 Wire the cables of the COMBOX-NET.EIP to the machine as far away as possible from the main power line.
 Do not pull the cables connected to the COMBOX-NET.EIP with excess force. Doing so may cause a wire break or faulty
contact.
 When storing the COMBOX-NET.EIP or when cable connectors are not connected to the COMBOX-NET.EIP, attach the
covers (provided) to protect against dust.
 Before using the COMBOX-NET.EIP, read all the Operation Manuals for the controller, CNC, PLC and PC to be connected.
 Do not disassemble or modify the COMBOX-NET.EIP. When the COMBOX-NET.EIP has been disassembled or modified
performance from then on can no longer be guaranteed. There are no user serviceable parts available.
 Be sure to supply power of the rated power voltage to the COMBOX-NET.EIP. Supplying power outside the rated power
voltage range may cause a malfunction to occur.

2 BASIC PACKAGE

When opening the package, check if it includes all items listed in " Packing List Contents ".
In the event of any shortage, please contact either NAKANISHI (see the " 4 CONTACT US " section) or your local dealer.
 Packing List Contents
①
②
No. Part Name
COMBOX-NET.EIP Main Body
①
② Power Connector
③ Rubber Cover*
DIP Switch Cover*
④
LAN Port Cap*
⑤
*The rubber covers, DIP switch covers, LAN port cap, external input/output A connector cover and external input/output B
connector cover are provided with the main body.
！ CAUTION
④
③
Quannity
1
1
3
3
1
⑨
⑤
⑥
No. Part Name
⑥ External Input/Output A Connector*
⑦ External Input/Output B Connector*
⑧ Mounting Screw
⑨ Bracket
45
⑦
⑧
Quannity
1
1
4
1