Nakanishi COMBOX-NET.EIP Operation Manual page 20

 Operation of DIP switches for setting the IP address
 Turn the switch using an insulated flathead screwdriver. At this time, take sufficient care to prevent static electricity
from being generated. Failure to do so may cause a malfunction.
➊ Insert the insulated flathead screwdriver into the DIP switch for setting the IP address of the desired octet, and turn the
screwdriver in the desired direction to set the IP address.
①
SW1
➋ After setting the IP address, install the three covers for the DIP switches and motor speed adjustment knob by referring
to "8-4 Attaching Covers."
！CAUTION
②
②
SW2 SW3
61