D-Sub Cable Specifications - Nakanishi COMBOX-NET.EIP Operation Manual

8–5 D-Sub Cable Specifications
 To minimize RF interference and noise, please keep the length of the cables as short as possible and route them
separately or as far away as possible from high voltage electrical cables.
 Use only shielded cables to minimize RF interference and noise. Connect the shield to the plug cover.
 Connect the shielded line to the Input / Output connector (The shielded line is grounded).
Prepare a D-Sub cable and connector hood.
 For external input/output A (EXIT I/O-A)
 For external input/output B (EXIT I/O-B)
 Connector hood size
<Mountable D-Sub connector hoods>
Connector
High-density D-Sub
15 pins
D-Sub 15 pins
D-Sub 25 pins
Use M2.6 mounting screws for D-Sub connectors.
A
33.8 mm or less
42 mm or less
57.8 mm or less
COUTION
B
16 mm or less
16 mm or less
16 mm or less
56