Sensor Connections - Nakanishi COMBOX-NET.EIP Operation Manual

8–11 Sensor Connections
 Digital sensor
 Wire by referring to the figure below and "8-8 Digital Sensor Input Connector" matched to the type of sensor (NPN,
PNP) used.
Attaching a different type of sensor to an input may cause a failure or malfunction.
 Note that the indicator is ON at all times regardless of the ON/OFF state of the sensor when a digital sensor is
configured in an internal circuit like the one in the figure below.
The sensor signal (ON/OFF) is normally recognized.
 Analog sensor
Wire by referring to the figure below and "8-9 Analog Sensor Input Connector."
The analog sensor supports an output voltage of 0 to 5 V.
NOTICE
NOTICE
59