How To Connect Connectors - Nakanishi COMBOX-NET.EIP Operation Manual

8–10 How To Connect Connectors
 Power connector
➊ Strip back 7 mm of sheath from the end of AWG16 to 26 wire.
➋ Insert the stripped bare wire into the power connector as far as possible.
Tighten with a flatheaded screwdriver.
Tightening torque: 0.22 - 0.25 Nm
➌ Connect the power connector with the top and bottom aligned so that it fits into the socket.
Tighten with a flatheaded screwdriver.
Tightening torque: 0.3 Nm
 Digital sensor input connector, analog sensor input connector
When using a digital sensor input connector and analog sensor input connector, connect each connector in the same
way into their respective socket.
58