Combox-Net.eip Parameter Settings Of Connected Controller - Nakanishi COMBOX-NET.EIP Operation Manual

<COMBOX-NET.EIP Parameter Settings of Connected Controller>
Setting of Error
OFF
Output Mode
Setting AUTO Mode for
OFF
Motor Speed Control
(Motor No.1)
Setting Fixed Motor OFF
Speed
Motor No.2
Setting Fixed Motor OFF
Speed
(Motor No.1)
Setting Maximum OFF
Motor Speed
Motor No.2
Setting Maximum OFF
Motor Speed
Selection of External
An
Speed Control Mode
Selection of External
Motor Start Signal OFF
Control Mode
Selection of Air Input
OFF
Monitoring Override
Selection of Motor Speed
Control Voltage / DC+10V OFF
Signal Method
Selection of Motor Speed
Control Voltage/DC+10V OFF
Signal Method
Setting of Motor
Acceleration and OFF
Deceleration Time
Error Occurred : Error Occurred :
ON
Signal is 'OFF'. Signal is 'ON'.
External Input/Output
ON Control Panel
Connector
Fixed Motor Speed Fixed Motor Speed
ON
is enabled. is not enabled.
Fixed Motor Speed Fixed Motor Speed
ON
is enabled. is not enabled.
Setting of Maximum Setting of
Motor Speed is not ON Maximum Motor
enabled. Speed is enabled.
Setting of Maximum Setting of
Motor Speed is not ON Maximum Motor
enabled. Speed is enabled.
Set speed by Set speed by
Cn
Analog Signal. Pulse Signal.
The startup motor with
Motor startup and
FWD. rotation or the
rotating direction is not ON
startup motor with REV.
commanded by signal.
rotation.
Air pressure is Air pressure is not
ON
supplied. supplied.
The characteristics of The characteristics of
the motor's maximum the motor's maximum
ON
rotation speed 60,000 rotation speed
min (rpm). 80,000 min
-1
The characteristics of The characteristics of
the motor's maximum the motor's maximum
ON
rotation speed 50,000 rotation speed
min (rpm). 30,000 min
-1
Desired
Default ON Acceleration and
Deceleration Time
Error
Cd P1 Select P1 Select P1 Select P1 Select P1 Select
Code
― ― P2 OFF P2 OFF P2 OFF P2 OFF P2 OFF
― ― P3 OFF P3 OFF P3 OFF P3 OFF P3 OFF
― ― ―
― ― P4 OFF P4 OFF P5 OFF P4 OFF P4 OFF
― ― ―
Set speed
Po by Speed P5 Select P5 Select P7 Select P5 Select P5 Select
Point Signal.
― ― P6 OFF P6 OFF P8 OFF P6
― ― P7 OFF ―
― ― P8 Select ―
(rpm).
-1
― ― ―
(rpm).
-1
― ― ―
80
E3000 E4000 E2280
― ― ― P4 OFF
― ― ― P6 OFF
― P9 OFF
― ― ―
― ― ― PA Select ―
― P7 OFF ― ―
iSpeed3 iSpeed5
― ― ― ―
― ― ― ―
OFF P6 OFF
― ― ― ―
― ― ― ―
― ― ―
P7 OFF P7 OFF