Transition Networks CMEFG1013-100 User Manual

Slide-in-module, stand-alone media converters copper to fiber gigabit ethernet 10/100/1000base-t to 1000base-sx/lx

Hide thumbs

Quick Links

Download this manual

Enlarged version

User's Guide

CMEFG10xx-1xx

(local)

CMEFG10xx-1xx - Slide-in-Module

SMEFG10xx-1xx - Stand-Alone

Media Converters

•

Copper to Fiber Gigabit Ethernet

•

10/100/1000Base-T to 1000Base-SX/LX

Transition Networks CMEFG10xx-1xx and

SMEFG10xx-1xx series gigabit Ethernet media

converters connect 10/100/1000Base-T

shielded or unshielded twisted-pair copper

cable to 1000Base-SX/LX fiber-optic cable.

The media converters are designed to be

installed in pairs where the CMEFG10xx-1xx

is the local media converter and the

SMEFG10xx-1xx is the remote media

converter.

Remote management

The CMEFG10xx-1xx (chassis version) is designed to remotely manage the

SMEFG10xx-1xx (the stand-alone version) or another CMEFG10xx-1xx per IEEE

802.3ah™:2004 standard.

For example, a local CMEFG1011-100 converter installed in a managed Transition

Networks PointSystem™ chassis is connected, via fiber, to a remote SMEFG1011-

100 converter.

Network management

The SNMP section lists commands for monitoring and managing a networked

media converter at a remote location. The CMEFG10xx-2xx and SMEFG10xx-2xx

devices are supported by 050xxxxx and later revisions of the management agent.

Please download the latest management firmware at www.transition.com.

Installation . . . . . . . . . . . . . . . . . . . . . . . . . .5

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Diagnostic Management Interface (DMI) . . . .14

Cable Specification . . . . . . . . . . . . . . . . . . . .15

Technical Specifications . . . . . . . . . . . . . . . .18

Troubleshooting . . . . . . . . . . . . . . . . . . . . . .19

Compliance . . . . . . . . . . . . . . . . . . . . . . . . .23

SMEFG10xx-1xx

(remote)

Need help?

Do you have a question about the CMEFG1013-100 and is the answer not in the manual?

Questions and answers

Summary of Contents for Transition Networks CMEFG1013-100

Page 1: Table Of Contents
SMEFG10xx-1xx series gigabit Ethernet media converters connect 10/100/1000Base-T shielded or unshielded twisted-pair copper cable to 1000Base-SX/LX fiber-optic cable. The media converters are designed to be installed in pairs where the CMEFG10xx-1xx is the local media converter and the SMEFG10xx-1xx is the remote media converter.
Page 2 (for a total of 16 traps). In addition, if both the local and remote media converters are DMI models, the device will distinguish whether the trap event is from a local or a remote device.
Page 3: Installation
10/100/1000Base-TX to 1000Base-SX/LX • Small Form Fact Pluggable (SFP) Fiber Port Transition Networks SMEFG1040-1xx series media converters connect 10Base-TX, 100Base- TX, or 1000Base-TX twisted-pair copper cable to 1000Base-SX or 1000Base-LX fiber cable. The SMEFG1040-10x has one copper port and one SFP port.
Page 4: Operation
(P/N SPS1872-xx ) for powering the media converter. Operation Status LEDs The CMEFG10xx-1xx and SMEFG10xx-1xx series media converters are designed to operate without user intervention. Use the status LEDs to monitor the media converter operation in the network. Copper status LEDs The status LEDs for the copper connection are integrated into the RJ-45 port.
Page 5 CMEFG10xx-1xx / SMEFG10xx-1xx Operation -- Continued Fiber status LEDs The status LEDs for the 1000Base-SX-LX fiber connection (FD and LACT) as well as the LED for the power (PWR) are located next to the fiber port. Connection to external AC power. LACT A link has been established for the fiber connection.
Page 6 Operation -- Continued Automatic link restoration The CMEFG10xx-1xx and SMEFG10xx-1xx media converters include a unique feature called automatic link restoration. These two converters will automatically restore the link between network devices after a fault condition has been corrected. The competitors’ products, in contrast, require the user to power down, then power up the converters, after a fault condition has been corrected.
Page 7: Automatic Firmware Upgrade
CMEFG10xx-20x / SMEFG10xx-20x Operation -- Continued Automatic firmware upgrade The media converter has an automatic firmware upgrade feature. This feature applies to a data link consisting of a local and remote media converter connected via fiber optic cable. If the remote converter is not in active mode, and an in-active-mode local converter detects a different firmware revision in the remote converter, the local converter will force a boot-load condition and download its firmware revision.
Page 8: Cable Specification
<10-9 Single mode fiber (recommended): 9 µm Multimode fiber (recommended): 62.5/125 µm Multimode fiber (optional): 100/140, 85/140, 50/125 µm CMEFG1013-100, SMEFG1013-100 850 nm multimode Fiber Optic Transmitter Power: min: -10.0 dBm Fiber Optic Receiver Sensitivity: min: -17.0 dBm Link Budget: 7.0 dB...
Page 9: Copper Cable
CMEFG10xx-1xx / SMEFG10xx-1xx Cable Specification -- continued Fiber cable (DMI models) CMEFG1013-110, SMEFG1013-110 850 nm multimode Fiber Optic Transmitter Power: min: -10.0 dBm Fiber Optic Receiver Sensitivity: min: -17.0 dBm Link Budget: 7.0 dB CMEFG1014-110, SMEFG1014-110 1310 nm single mode Fiber Optic Transmitter Power: min: -9.0 dBm Fiber Optic Receiver Sensitivity:...
Page 10: Technical Specifications
The information in this user’s guide is subject to change. For the most up-to- date information on the CMEFG10xx-1xx / SMEFG10xx-1xx media converters, view the user’s guide on-line at: www.transition.com. 24-hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600...
Page 11 CMEFG10xx-1xx / SMEFG10xx-1xx Troubleshooting -- Continued Is the copper Duplex/Link LED illuminated yellow or green? • Check the twisted pair cables for proper connection. • Contact Tech Support: 1-800-260-1312, Int’l: 00-1-952-941-7600. YES - Yellow • The media converter has selected half-duplex mode for the twisted pair link.
Page 12: Contact Us
Name of Mfg: Transition Networks 6475 City West Parkway, Minneapolis MN 55344 U.S.A. Model: xMEFG10xx-1xx Series Media Converters Part Number(s): CMEFG1013-100, CMEFG1014-100, CMEFG1015-100, CMEFG1017-100, CMEFG1035-100, CMEFG1029-100, CMEFG1029-101, CMEFG1029-102, CMEFG1029-103, CMEFG1013-110, CMEFG1014-110, CMEFG1015-110, CMEFG1029-110, CMEFG1029-111, CMEFG1029-112, CMEFG1029-113 CMEFG1040-100 SMEFG1013-100, SMEFG1014-100, SMEFG1015-100, SMEFG1017-100,...
Page 13 CMEFG10xx-1xx / SMEFG10xx-1xx Trademark Notice All trademarks and registered trademarks are the property of their respective owners. Copyright Restrictions © 2005 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or means (graphic, electronic, mechanical) without written permission from Transition Networks.

Transition Networks CMEFG1013-100 User Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Transition Networks CMEFG1013-100

Summary of Contents for Transition Networks CMEFG1013-100

This manual is also suitable for: