Introduction - Siemens KION Service Manual

KION / KION-i
Only personnel trained and authorized
by Siemens shall be permitted to
perform installation, service or
maintenance of the KION / KION-i
workstation.
Make sure to prepare the KION / KION-i
workstation properly before disassembling and
assembling. Refer to section "Hazard notices" in
chapter "Important".
Any service or maintenance must be noted in a
log book.
Discard disposable, replaced and left-over parts in
accordance with appropriate industrial and
environmental standards.
After any installation, maintenance or service
intervention in the KION / KION-i, perform a
"Calibration" and a "Function check".
Refer to the "KION / KION-i anesthesia
workstation - Operating Manual" for details.
E382 E392E 061 01 02 02

2. Introduction

Main units ..........................................................
Battery drawer ................................................
Pneumatic section ..........................................
Vaporizer section ............................................
Patient unit .....................................................
User interface .................................................
Electronic structure ...........................................
General ...........................................................
Internal communication ..................................
Siemens-Elema AB
Introduction
2 - 2
2 - 3
2 - 4
2 - 5
2 - 6
2
2 - 7
2 - 8
2 - 8
2 - 9
2 - 1