Siemens KION Service Manual page 167

KION / KION-i
Only personnel trained and authorized
by Siemens shall be permitted to
perform installation, service or
maintenance of the KION / KION-i
workstation.
Make sure to prepare the KION / KION-i
workstation properly before disassembling and
assembling. Refer to section "Hazard notices" in
chapter "Important".
Any service or maintenance must be noted in a
log book.
Discard disposable, replaced and left-over parts in
accordance with appropriate industrial and
environmental standards.
After any installation, maintenance or service
intervention in the KION / KION-i, perform a
"Calibration" and a "Function check".
Refer to the "KION / KION-i anesthesia
workstation – Operating Manual" for details.
E382 E392E 061 01 02 02
7. Maintenance
General .................................................................. 7 - 2
Preparations ........................................................... 7 - 2
Required equipment .............................................. 7 - 2
Handling PC boards ............................................... 7 - 2
Twelve months maintenance ................................ 7 - 3
Maintenance kit contents ................................. 7 - 3
Performing the Twelve months
maintenance ..................................................... 7 - 4
Replacing the internal battery ............................. 7 - 12
Performing the battery replacement ............. 7 - 12
Siemens-Elema AB
Maintenance
7
7 - 1