System Operation With Controller Lpc-2000.2 (Plc Version); State Diagram Of The Plc Interface - Levitronix BPS-2000.1 User Manual

5.2 System Operation with Controller LPC-2000.2 (PLC version)

5.2.1 State Diagram of the PLC Interface

Enable:
not active
Priming: on
Enable: active
Reset: not active
ON
(Priming Mode)
Status : active
Error : not active
State 10
Timeout,
Process Mode:
active
Figure 39: PLC interface state diagram for standard firmware E1.48 and E2.48
PL-4021-00, Rev03, DCO# 15-235
Power On
Status : not active
State 1
Enable: not active
(Speed Control Mode)
Timeout,
Process
Status : Active
Mode:
Error : not active
not active
State 5
Process Mode:
not active
(Process Control
Mode)
Status : Active
Error : not active
State 6
(For other configurations refer to alternate firmware documentation)
Off
Priming: off
Enable: active
Reset: not active
ON
Internal Error
Process Mode:
active
ON
User Manual for BPS-2000
www.levitronix.com
Reset: active
ERROR
Status : not active
Error : active
State 4
Internal Error
36