Appendix; Regulatory Status; Ce Marking; Iecee Cb Safety Certification - Levitronix BPS-2000.1 User Manual

9 Appendix

9.1 Regulatory Status

9.1.1 CE Marking

The Centrifugal Pump System BPS-2000, in its various configurations, is in conformity with the below
mentioned European Directives. The pump system is thought to be used in hydraulic circuits of production
equipment of the Semiconductor, Chemical and general machinery applications.
Machinery Directive 2006/42/EC:
The machinery directive essentially has been followed by a risk analysis, according mitigation actions and a user manual
for safe operation. For the design and testing the following standards are used as a guideline:
EN809 Pumps for Fluids: basic requirements are followed.
EN12162 Procedure for hydrostatic pressure testing in fluid pumps: used for max. pressure testing of pump head.
Safety for machinery – principles for risk assessments: used for system risk analysis.
ISO12100
EMC Directive 2014/30/EC:
The following standards of the EMC directive are tested and confirmed at a certified laboratory:
EN61000-6-2 Generic standards, Immunity for industrial environments
EN61000-6-4 Generic standards, Emission standard for industrial environments
Low Voltage Directive 2014/35/EC:
The low voltage directive essentially has been followed by a risk analysis, according mitigation actions and a user
manual for safe operation. For the design and testing the following standards are used as a guideline:
EN61010-1 Safety requirements for electrical equipment: 3
Safety for machinery – principles for risk assessments: used for system risk analysis.
ISO12100

9.1.2 IECEE CB Safety Certification

Specific motors with pump heads and controllers of the Centrifugal Pump System BPS-2000 are 3
tested and certified by Electrosuisse following the IECEE CB Scheme according to the following safety
standards:
Safety requirements for electrical equipment for measurement, control and laboratory use.
IEC61010-1
The CB certification number is CH-7546.

9.1.3 NRTL/ETL Safety Certification and Marking

Specific motors with pump heads and controllers of the Centrifugal Pump System BPS-2000 are tested by
the US national recognized laboratory (NRTL) Intertek according to the following safety standards:
UL61010-1 Safety requirements for electrical equipment for measurement, control and laboratory (US Standard).
CSA-C22.2 Safety requirements for electrical equipment for measurement, control and laboratory use (Canadian Standard).
No. 61010-1-12
UL1004-1 Rotating Electrical Machines - General Requirements (US standard).
The ETL control number for the listing is 4010272.
PL-4021-00, Rev03, DCO# 15-235
rd
party tested.
User Manual for BPS-2000
www.levitronix.com
rd
party
44