Related Manuals for Frick QUANTUM ACUair
Summary of Contents for Frick QUANTUM ACUair
- Page 1 S90-500 O/APR 2001 File: SERVICE MANUAL - SECTION 90 Replaces: Dist: 3, 3a, 3b, 3c OPERATION INSTRUCTIONS FRICK QUANTUM ACUair CONTROL PANEL Version 1.0x...
-
Page 2: Table Of Contents
S90-500 O FRICK QUANTUM CONTROL PANEL Page 2 ACUair OPERATION Table of Contents Quick Overview Of Graphic Screens ____________________________________________________________ 3 Overview Of Operator Interface ________________________________________________________________ 4 Operator Access __________________________________________________________________________ 4 Keys And Key Functions __________________________________________________________________ 5 Keypad Keys ___________________________________________________________________________ 5... -
Page 3: Quick Overview Of Graphic Screens
FRICK QUANTUM CONTROL PANEL S90-500 O ACUair OPERATION Page 3 Quick Overview of Graphic Screens "AIR HANDLING UNIT OVERVIEW" SCREEN – SHOWS OVERVIEW OF ALL THE CONNECTED UNITS “Login to Unit” SELECTION – enter Id of ACUair unit to view on the “OPERATING STATUS” SCREEN "PANEL SETUP"... -
Page 4: Overview Of Operator Interface
January (Jan.) to December (Dec.) is Quantum ACUair control panel. This manual is intended to displayed. The day of the month from 1 to 31 and the year describe all presently available features. -
Page 5: Keys And Key Functions
FRICK QUANTUM CONTROL PANEL S90-500 O ACUair OPERATION Page 5 KEYS AND KEY FUNCTIONS KEYPAD KEYS [ENTER] - When changing data in a data entry field, this key will input the change. Following is a list of the labeled keypad keys and the... -
Page 6: Screen Keys
Any modification to these control settings [Change Setpoints] - When on a screen that has is the sole responsibility of the user/owner and Frick adjustable setpoint values, this positions the cursor at the disclaims any liability for the consequences of these first data entry field. -
Page 7: Initial Setup Procedure
FRICK QUANTUM CONTROL PANEL S90-500 O ACUair OPERATION Page 7 INITIAL SETUP PROCEDURE Setup” is intended to be accessed and performed only by a Factory Representative or Distributor. “Panel Setup” is performed first. “Panel Setup” is used to setup panel features and options that later Calibrate the control devices. -
Page 8: Air Handling Unit Overview" Screen - Screen Key Set
S90-500 O FRICK QUANTUM CONTROL PANEL Page 8 ACUair OPERATION "AIR HANDLING UNIT OVERVIEW" SCREEN - SCREEN KEY SET • Following are the screen key selections for the "Air Change Current Time and Date • Handling Unit Overview" screen: Pressure Units •... -
Page 9: Unit Selected - "Operating Status" Screen
FRICK QUANTUM CONTROL PANEL S90-500 O ACUair OPERATION Page 9 UNIT SELECTED – "OPERATING STATUS" SCREEN The most important information about the unit is displayed The alarm status is displayed in the indented box below here. In the middle of the screen is a diagram of an the air handling unit data box. -
Page 10: Operating Status" Screen - Screen Key Set
S90-500 O FRICK QUANTUM CONTROL PANEL Page 10 ACUair OPERATION DEMAND OUTPUT BOX: "OPERATING STATUS" SCREEN - SCREEN KEY SET The bottom box on the left side of the screen holds the demand control values. These values range from 0 - Following are the screen key selections for the "Operating... -
Page 11: Unit Selected - "Main Menu" Screen
FRICK QUANTUM CONTROL PANEL S90-500 O ACUair OPERATION Page 11 • The following inputs are shown in the second block (if they Off - The output is de-energized or turned off. were enabled during the board setup). The following outputs are shown in the first block (if they •... -
Page 12: Main Menu Selection - "Alarms/Shutdowns" Screen
S90-500 O FRICK QUANTUM CONTROL PANEL Page 12 ACUair OPERATION MAIN MENU SELECTION - "ALARMS/SHUTDOWNS" SCREEN following "Alarms/Shutdowns" screen To clear or reset the "Alarms/Shutdowns" screen and selection keys: turn off any alarm annunciation device, from the screen press the [Clear Alarms] key. This will also •... -
Page 13: Main Menu Selection - "Control Setup" (1) Screen
FRICK QUANTUM CONTROL PANEL S90-500 O ACUair OPERATION Page 13 MAIN MENU SELECTION - "CONTROL SETUP" (1) SCREEN • This screen is accessible from the “Main Menu” screen Minimum Outside Air - When the unit is running, this when Security is set to either "Moderate Access" or "No setpoint defines the minimum percent setting for the Access". -
Page 14: Main Menu Selection - "Control Setup" (2) Screen
S90-500 O FRICK QUANTUM CONTROL PANEL Page 14 ACUair OPERATION MAIN MENU SELECTION - "CONTROL SETUP" (2) SCREEN This screen is accessible from the “Main Menu” process is used to confirm that an ACUair control board screen when Security is set to "Full Access". These properly receives control setpoint changes. -
Page 15: Control Setup - "Cooling Control Setup" Screen
FRICK QUANTUM CONTROL PANEL S90-500 O ACUair OPERATION Page 15 CONTROL SETUP - “COOLING CONTROL SETUP” SCREEN Cooling Control Setpoints used maintain Setpoint forces the unit to remain on for a minimum time temperature in either Process or Cleanup Mode. A PID... -
Page 16: Control Setup - "Heating Control Setup" Screen
S90-500 O FRICK QUANTUM CONTROL PANEL Page 16 ACUair OPERATION Proportional Band calculation. While the Return Air As the Cooling PID output varies as described above, the Temperature is greater than 39 °F (the Process Control Cooling Stage #1 and #2 outputs are controlled by the Setpoint plus the Proportional Band) the PID output holds Stage #1 and Stage #2 Demand Setpoints. -
Page 17: Control Setup - "Exhaust Control Setup" Screen
FRICK QUANTUM CONTROL PANEL S90-500 O ACUair OPERATION Page 17 CONTROL SETUP - “EXHAUST CONTROL SETUP” SCREEN The Exhaust Setpoints control the two exhaust fans on the Stage #1 Start = 35% unit. The Exhaust Demand Value, which is displayed in... -
Page 18: Control Setup - "Damper Control Setpoint" Screen
S90-500 O FRICK QUANTUM CONTROL PANEL Page 18 ACUair OPERATION CONTROL SETUP - “DAMPER CONTROL SETPOINT” SCREEN The Damper Setpoints control the Outside Air Dampers The Economizer flag, displayed above the Economizer and the Economizer function of the unit. The Minimum... -
Page 19: Control Setup - "Safety Setpoints" Screen
FRICK QUANTUM CONTROL PANEL S90-500 O ACUair OPERATION Page 19 CONTROL SETUP - “SAFETY SETPOINTS” SCREEN • These alarm setpoints are important for safe operation. Ammonia Alarm Delay - Amount of time that the ammonia reading must be greater than the shutdown... -
Page 20: Main Menu Selection - "Analog Calibration" Screen
S90-500 O FRICK QUANTUM CONTROL PANEL Page 20 ACUair OPERATION MAIN MENU SELECTION - "ANALOG CALIBRATION" SCREEN The following warning message is displayed when have thoroughly read and understood all manuals and selecting this menu selection: literature accompanying the unit. IMPROPER... -
Page 21: Analog Calibration - "Temperature Calibration" Screen
FRICK QUANTUM CONTROL PANEL S90-500 O ACUair OPERATION Page 21 ANALOG CALIBRATION - "TEMPERATURE CALIBRATION" SCREEN • This screen shows a thermometer and the current Discharge Air • temperature readings for: Return Air • • Outside Air Coil Air The Setting for the "Current Value" is blank until a measurement sensor and its settings are shown. -
Page 22: Analog Calibration - "Humidity/Position Calibration" Screen
S90-500 O FRICK QUANTUM CONTROL PANEL Page 22 ACUair OPERATION ANALOG CALIBRATION - "HUMIDITY/POSITION CALIBRATION" SCREEN • This screen shows a meter and the current analog Exhaust Damper 1 • readings for: Exhaust Damper 2 • • Outdoor Damper Ammonia The Setting for the "Current Value"... -
Page 23: Panel Setup" Screen
FRICK QUANTUM CONTROL PANEL S90-500 O ACUair OPERATION Page 23 “PANEL SETUP” SCREEN The current setup is shown at the Panel Setup selection. "Pressure Units -- PSIA, PSIG or SI" The following Panel Setup screens can be selected: SCREEN •... -
Page 24: Panel Setup - "Screen Settings" Screen
[Disable] - Disables the screen saver. • [Standard Screen] - The Frick "Blue" screen color is [Enable] - Enables the screen saver. When there is used. no keypad activity at the panel, this screen saver will •... -
Page 25: Security Setup" Screen
FRICK QUANTUM CONTROL PANEL S90-500 O ACUair OPERATION Page 25 "SECURITY SETUP" SCREEN Change Moderate Access Security can be setup to allow different operators different Change Setpoints from Keypad: access rights to setpoints. If access is presently denied Enabled when an operator selects to [Change Setpoints] then a... -
Page 26: Alarms/Shutdowns Messages
S90-500 O FRICK QUANTUM CONTROL PANEL Page 26 ACUair OPERATION Alarms/Shutdowns Messages Damper Pos. Sensor Fault - Discharge Air Temp. Sensor Fault - Following is the alphabetical listing of all the possible alarms: Exhaust Fan 1 Pos. Sensor Fault - Ammonia Alarm - Exhaust Fan 2 Pos. - Page 27 FRICK QUANTUM CONTROL PANEL S90-500 O ACUair OPERATION Page 27...
- Page 28 S90-500 O FRICK QUANTUM CONTROL PANEL Page 28 ACUair OPERATION YORK Refrigeration 100 CV Avenue, P.O. Box 997 Waynesboro, Pennsylvania USA 17268-0997 Phone: 717-762-2121 • Fax: 717-762-8624 Printed in U.S.A. SUBJECT TO CHANGE WITHOUT NOTICE...
Need help?
Do you have a question about the QUANTUM ACUair and is the answer not in the manual?
Questions and answers