Table of Contents
Advertisement
Removing the palm rest
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
base
cover.
2. Remove the
wireless
card.
3. Remove the
solid-state
4. Remove the
memory
modules.
5. Remove the
rear-I/O
6. Remove the
computer
7. Remove the
coin-cell
8. Remove the
heat-sink
9. Remove the battery.
10. Remove the
system
board.
11. Remove the speakers.
12. Remove the
touch
pad.
13. Remove the
display
assembly.
14. Remove the keyboard.
15. Remove the
power-adapter
16. Remove the
power-button board
Procedure
After performing all the prerequisites, we are left with the palm rest.
computer. After working inside your computer, follow the instructions in
drive.
cover.
base.
battery.
assembly.
port.
.
After working inside your
51
Advertisement
Table of Contents
