Table of Contents
Advertisement
Removing the power-button board
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
base
cover.
2. Remove the
wireless
card.
3. Remove the
memory
modules.
4. Remove the
solid-state
5. Remove the
rear-I/O
6. Remove the
computer
7. Remove the
coin-cell
8. Remove the
heat-sink
9. Remove the battery.
10. Remove the
system
board.
Procedure
1. Remove the two screws (M2x3) that secure the power-button board to the palm-rest assembly.
2. Lift the power-button board, along with its cable, off the palm-rest assembly.
3. Peel the power-button board cable from the palm-rest assembly.
computer. After working inside your computer, follow the instructions in
drive.
cover.
base.
battery.
assembly.
After working inside your
43
Advertisement
Table of Contents
