Table of Contents
Advertisement
Removing the speakers
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
base
cover.
2. Remove the
wireless
card.
3. Remove the
solid-state
4. Remove the
memory
modules.
5. Remove the
rear-I/O
6. Remove the
computer
7. Remove the
coin-cell
8. Remove the battery.
9. Remove the
heat-sink
10. Remove the
system
board.
Procedure
1. Remove the screw (M2x3) that secures the speaker to the palm-rest assembly.
2. Lift the left speaker off the palm-rest assembly.
3. Peel off the tape that secures the speaker cable to the palm-rest assembly.
4. Remove the speaker cable from the routing guides on the palm-rest assembly.
5. Lift the right speaker off the palm-rest assembly.
computer. After working inside your computer, follow the instructions in
drive.
cover.
base.
battery.
assembly.
After working inside your
39
Advertisement
Table of Contents
