Table of Contents
Advertisement
Removing the keyboard
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
base
cover.
2. Remove the
wireless
card.
3. Remove the
solid-state
4. Remove the
memory
modules.
5. Remove the
rear-I/O
6. Remove the
computer
7. Remove the
coin-cell
8. Remove the
heat-sink
9. Remove the battery.
10. Remove the
system
board.
11. Remove the speakers.
12. Remove the
power-button board
Procedure
1. Remove the eight screws (M2x3) that secure the keyboard bracket to the palm-rest assembly.
2. Using a plastic scribe, pry the keyboard bracket off the palm-rest assembly.
3. Lift the keyboard bracket off the palm-rest assembly.
4. Lift the keyboard at an angle and remove it from the tabs on the palm-rest assembly.
computer. After working inside your computer, follow the instructions in
drive.
cover.
base.
battery.
assembly.
.
After working inside your
45
Advertisement
Table of Contents
