Table of Contents
Advertisement
Replacing the display back-cover and antenna
assembly
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
Place the display back-cover and antenna assembly on a clean and flat surface.
Post-requisites
1. Replace the camera.
2. Replace the
camera
cable.
3. Replace the
display
hinges.
4. Replace the
display
panel.
5. Replace the
display
bezel.
6. Replace the
display
assembly.
7. Replace the
system
board.
8. Replace the battery.
9. Replace the
heat-sink
10. Replace the
coin-cell
11. Replace the
computer
12. Replace the
rear-I/O
13. Replace the
memory
modules.
14. Replace the
solid-state
15. Replace the
wireless
card.
16. Replace the
base
cover.
70
computer. After working inside your computer, follow the instructions in
assembly.
battery.
base.
cover.
drive.
After working inside your
Advertisement
Table of Contents
