Table of Contents
Advertisement
Removing the base cover
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Procedure
Procedure
1. Loosen the five captive screws that secure the base cover to the computer base.
2. Using a plastic scribe, gently pry the base cover to release the tabs on the base cover from the slots on the computer base.
3. Lift the base cover off the computer base.
4. Using a plastic scribe, disconnect the battery cable from the system board.
12
computer. After working inside your computer, follow the instructions in
After working inside your
Advertisement
Table of Contents
