Table of Contents
Advertisement
Removing the display hinges
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
NOTE: These instructions are applicable only for laptops with a non-touch screen display.
1. Remove the
base
cover.
2. Remove the
wireless
card.
3. Remove the
solid-state
4. Remove the
memory
modules.
5. Remove the
rear-I/O
6. Remove the
computer
7. Remove the
coin-cell
8. Remove the
heat-sink
9. Remove the battery.
10. Remove the
system
board.
11. Remove the
display
assembly.
12. Remove the
display
bezel.
13. Remove the
display
panel.
Procedure
1. Press the hinge caps on both the edges to release the hinge caps from the hinge.
2. Remove the hinge caps off the hinges.
3. Remove the display cable from the routing guide on the display back-cover and antenna assembly.
computer. After working inside your computer, follow the instructions in
drive.
cover.
base.
battery.
assembly.
After working inside your
65
Advertisement
Table of Contents
