Table of Contents
Advertisement
Replacing the speakers
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Using the alignment posts, place the right speaker on the palm-rest assembly.
2. Route the speaker cable through the routing guides on palm-rest assembly.
NOTE: Move the keyboard and keyboard-backlit cables out of the way.
3. Using the alignment posts, place the left speaker on the palm-rest assembly.
4. Adhere the tape that secures the speaker cable to the palm-rest assembly.
5. Replace the screw (M2x3) that secures the speaker to the palm-rest assembly.
Post-requisites
1. Replace the
system
board.
2. Replace the
heat-sink
3. Replace the battery.
4. Replace the
coin-cell
5. Replace the
computer
6. Replace the
rear-I/O
7. Replace the
memory
modules.
8. Replace the
solid-state
9. Replace the
wireless
card.
10. Replace the
base
cover.
40
computer. After working inside your computer, follow the instructions in
assembly.
battery.
base.
cover.
drive.
After working inside your
Advertisement
Table of Contents
