Table of Contents
Advertisement
Replacing the coin-cell battery
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Adhere the coin-cell battery to the palm-rest assembly.
2. Connect the coin-cell battery cable to the system board.
Post-requisites
1. Replace the
computer
2. Replace the
rear-I/O
3. Replace the
solid-state
4. Replace the
wireless
card.
5. Replace the
base
cover.
computer. After working inside your computer, follow the instructions in
base.
cover.
drive.
After working inside your
27
Advertisement
Table of Contents
