Keyboard; Removing The Keyboard - Dell NOT22208 Owner's Manual

Steps
1. Align and place the power button on the palm-rest assembly.
2. Replace the two (M2x2.5) screws to secure the power button to the palm-rest assembly.
Next steps
1. Install the system board.
2. Install the assembly-inner
3. Install the heat sink (discrete GPU)
4. Install the M.2 2230 solid-state drive in Slot
5. Install the M.2 2230 or
6. Install the memory modules.
7. Install the WLAN card.
8. Install the 4G WWAN card
9. Install the battery.
10. Install the base cover.
11. Install the SIM card.
12. Follow the procedure in

Keyboard

Removing the keyboard

CAUTION: The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the SIM card.
3. Remove the base cover.
4. Remove the battery.
94 Removing and installing Field Replaceable Units (FRUs)
frame.
or heat sink (integrated
2, if applicable.
M.2 2280 solid-state drive in Slot 1, as applicable.
or 5G WWAN card, as applicable.
After working inside your
Before working inside your
GPU), as applicable.
computer.
computer.