Replacing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
NOTE: The rubber grommets may get pushed out while replacing the
speakers. Ensure that the rubber grommets are in their position after
placing the speakers on the computer base.
1
Using the alignment posts, place the speakers on the computer base.
2
Route the speaker cable through the routing guides on the computer base.
3
Replace the six screws (M2x3 Big head) that secure the speakers to the
computer base.
4
Connect the speaker cable to the system board.
Post-requisites
1
Replace the
status-light
2
Follow the procedure from step 3 to step 9 in
keyboard
assembly".
3
Replace the
rear
4
Replace the battery.
5
Replace the
base
66
computer. After working inside your computer, follow
After working inside your
board.
cover.
cover.
computer. For more safety best
www.dell.com/
"Replacing the palm rest and
Before