Table 28. Antenna-cable color scheme (continued)
Connectors on the
wireless card
Auxiliary
2. At an angle, slide the wireless card into the wireless-card slot (WLAN) on the system board.
3. Place the wireless-card bracket on the wireless card.
4. Align the screw hole on the wireless-card bracket with the screw hole on the system board.
5. Replace the screw (M2x3.5) that secure the wireless-card bracket and the wireless card to the system board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image indicates the location of the speakers and provides a visual representation of the removal procedure.
Antenna-cable color
Black
After working inside your
Before working inside your
Silkscreen marking
AUX
computer.
computer.
Removing and installing Customer Replaceable Units (CRUs)
▲ (black triangle)
47