Base Cover; Removing The Base Cover; Installing The Base Cover; Battery Connector - Dell Latitude 14 Rugged Extreme Owner's Manual

Base cover

Removing the base cover

1. Follow the procedure in
2. Remove the battery.
3. To remove the base cover:
a. Remove the screws that secure the base cover to the chassis.
b. Lift the base cover and remove it from the computer.

Installing the base cover

1. Place the base cover on the computer.
2. Secure the base cover to the computer by using the screws.
3. Install the battery.
4. Follow the procedure in

Battery connector

Removing the battery connector

1. Follow the procedure in
2. Remove the:
a. battery
b. base cover
3. To remove the battery connector:
a. Disconnect the battery connector cable from the system board [1].
b. Remove the screws that secure the battery connector board to the computer [2].
c. Lift and remove the battery connector board from the computer [3].
Before working inside your
After working inside your
Before working inside your
computer.
computer.
computer.
21