Interacoustics AD629 Instructions For Use Manual page 37

10. Click Start-depending on the size of your thumb drive these may take a while. When the
format is complete you will receive a pop-up indicating it has formatted successfully.
11. Copy "update_user.logo.bin" file onto the formatted thumb drive.
12. It is very important that this file and only this file is present on the USB thumb drive.
13. With the audiometer turned off insert the thumb drive into any available USB port.
14. Turn on the AD629 and push the Temp/Setup button from the Tone test screen.
15. Enter "Common Settings" using the Setup/Tests button.
16. For the question "Do you want to install" press the "Yes" button.
17. After installation is completed, press the "Back" button to get to the testing screen.
D-0133833-A – 2022/09
AD629 - Instructions for Use - EN Page 34