Getting Started - Setup And Installation - Interacoustics AD629 Instructions For Use Manual

Device for diagnosing hearing loss
Table of Contents

Advertisement

3 Getting started - setup and installation

The following shows an overview of the AD629:
Monitors
peaker
Microphone
and
Headphone
(Headset)
mini jacks
Talk
forward
mic.
The top left part of the AD629 (display holder) contains monitor speaker.
The left side of the AD629 contains two mini jack connectors for a microphone and a headphone – or a
headset. This is used for talkback headphone/speaker (TB) and talk forward microphone (TF).
A goose neck microphone can be plugged into the top part of the AD629 just above the Talk Forward
button. This can be used for talk forward. When not plugged in the goose neck microphone can be placed
underneath the display. Please refer to the section about patient communication for more details.
The upper right side of the AD629 holds the on/off switch of the AD629.
Make sure that the audiometer is placed so that the patient cannot see/hear of the clinician uses the
AD629
D-0133833-A – 2022/09
AD629 - Instructions for Use - EN
Back Panel - connectors
Power
on/off
Front Panel
display &
buttons/dials
Page 7

Advertisement

Table of Contents
loading

Table of Contents