Back Panel External Connections - Standard Accessories; Pc-Interface - Interacoustics AD629 Instructions For Use Manual

3.1 Back panel external connections – standard accessories
The back panel contains all the rest of the main connectors (sockets):
USB B Connector
for PC connection
LAN (for
Power
future use)
connector
Special notes:
In addition to the standard DD45 headset, four other air conduction transducers may be used
•
(they all connect to specific outputs on the AD629):
• HDA300: High Frequency requires a HF headset
• EAR-Tone 3A or 5A general purpose insert phone: Insert headphone EAR-Tone 3A or
5A are high quality transducers that may be used instead of the DD45/TDH39. It
improves cross hearing from the normal approximately 40dB of the TDH39 to
approximately 70dB. Masking as well as avoiding over-masking is thus easier with this
type of headphone.
• IP30 insert phone is the standard insert phone with same properties as EAR-Tone 3A
The LAN connection is currently not used for any application (only internally in production)
•
• Mic 2: Please refer to the section about Patient Communication (Talk Forward and Talk Back)
CD-input: It is required that any attached CD-player has a linear frequency response in order to
•
comply with the requirements of IEC 60645-2
USB connections is used for:
•
PC connection to Diagnostic Suite (the large USB connector)
•
• Direct print
PC-keyboard (for entering client names)
•

3.2 PC-interface

Please refer to the Diagnostic Suite operation manual regarding hybrid mode (on-line and PC-operated
mode) as well as patient/session data transfer.
D-0133833-A – 2022/09
AD629 - Instructions for Use - EN
Standard
3 USB A
Headphones
connectors for
DD45/TDH39/H
printer, mouse
DA300/DD65v2
keyboard and
memory stick
Free Field 1
and 2 (external
amplification)
Bone
conductor
B71
Insert Phone
Insert
Eartone 3A /
masking
IP30
Patient
For Talk Back
Response
Mic.
Switch
Extra Talk External CD /
forward mic., MP3 input
e.g., for table
mic.
Page 8