Setup - Interacoustics AD629 Instructions For Use Manual

3.6 Setup

Allows the clinician to make changes in certain settings within each test and to change the common
settings for the AD629. A single push will by default enter the selected Test Settings menu. To enter other
settings menus, hold the "Setup" button and use on of the rotary wheels (41)/(43) to select:
To save the settings use "Save all settings as...".
To use another user setting (protocol/profile) use "Load user settings: 'name of user setting'....".
Inside a settings menu, choose between the different settings using the right rotary wheel (43). Change
the individual settings using the left rotary wheel (41). Here an example from the Tone settings dialogues
where "Aided" is in focus:
D-0133833-A – 2022/09
AD629 - Instructions for Use - EN Page 26