Table of Contents
Advertisement
5.
Insert the carrier plate mounting screws and start to fix them from the front side
(i.e. the side facing the FWA-2320 motherboard).
Securely tighten the screws using a PH2 screw driver after having inserted all
four screws.
Figure 3.29 Insertion of the carrier into the chassis
6.
Connect the SATA cable delivered with the unit to the disk as well as the mother
board connector. Please make yourself aware of the keying mechanism in the
SATA connector before inserting the cable.
Figure 3.30 SATA cabling
65
FWA-2320 User Manual
Advertisement
Table of Contents
