Advantech FWA-2320 User Manual page 68

Table 3.12: SATA Configuration
Feature
SATA Port0
SATA Port1
SATA Port2
SATA Port3
SATA Port4
SATA Port5
SATA Mode
Aggressive Link Power
3.2.4 Security Setup
"Administrator Password" allows users to configure the system so that a password
after being installed is required each time the system boots, and/or an attempt is
made to enter the Setup program.

Note!


FWA-2320 User Manual
Default Description
Display only
Display only
Display only
Show current SATA devices in use on the MIC-
5332
Display only
Display only
Display only
AHCI Mode (1) IDE Mode. (2) AHCI Mode. (3) RAID Mode.
Aggressive Link Power Management Support.
Enabled
For Cougar Point B0 stepping onwards.
Figure 3.18 Security Setup
If ONLY the Administrator's password is set, then this only limits
access to Setup and is only asked for when entering Setup.
If ONLY the User's password is set, then this is a power on pass-
word and must be entered to boot or enter Setup. In Setup the User
will have Administrator rights.
The password length must be in the following range:
– Minimum length: 3
– Maximum length: 20
58