Table of Contents
Advertisement
After removing the top cover, follow the instructions below for 2.5" disk installation:
1.
Remove the plastic bag that protects the HDD carrier plate.
2.
The HDD carrier plate has 2 holes on each side to accommodate different HDD
vendor's mounting hole locations. Each of the holes provides a dampening rub-
ber to reduce disk vibration.
Do not remove the rubbers as this may lead to performance degradation or
even malfunction.
Insert the HDD drive from the top into the carrier plate. Align the HDD's mount-
ing threads with 2 holes on each side of the carrier plate. The holes to use may
vary from disk vendor to disk vendor. For some vendors, all 4 holes may align.
Figure 3.25 HDD Carrier plate dampeners
Figure 3.26 Carrier plate and HDD alignment
63
FWA-2320 User Manual
Advertisement
Table of Contents
