Set Code Id - Newland NLS-HR15 User Manual

**【Enter Setup】

Set Code ID

Code ID can only consist of one or two English letters. See the "Code ID Table" section in Chapter 7 to find the default
Code ID for Code 128.
To set the Code ID, scan the Set Code ID for Code 128 barcode, the numeric barcodes corresponding to the
hexadecimal value of a desired ID and the Save barcode.
【Set Code ID for Code 128】
Example: Set the Code ID of Code 128 to "p" (its hexadecimal value is 0x70)
1. Scan the Enter Setup barcode.
2. Scan the Set Code ID for Code 128 barcode.
3. Scan the numeric barcodes "7" and "0". (See the "Digit Barcodes" section in Chapter 7)
4. Scan the Save barcode. (See the "Save/Cancel Barcodes" section in Chapter 7)
5. Scan the Exit Setup barcode.
【Exit Setup】
65