Aim 128; Enable/Disable Aim 128; Set Length Range For Aim 128 - Newland NLS-HR20-RF User Manual

AIM 128

Enable/Disable AIM 128

When disabled, AIM 128 is identified as Code 128.
** Enable AIM 128

Set Length Range for AIM 128

The scanner can be configured to only decode AIM 128 barcodes with lengths that fall between (inclusive) the minimum
and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Set the Minimum Length (Default: 1)
Example: Set the scanner to decode AIM 128 barcodes containing between 8 and 12 characters:
1. Scan the Set the Minimum Length barcode.
2. Scan the numeric barcodes "0" and "8" from the "Digit Barcodes" section in Appendix.
3. Scan the Set the Maximum Length barcode.
4. Scan the numeric barcodes "0" and "C" from the "Digit Barcodes" section in Appendix.
33
Disable AIM 128
Set the Maximum Length (Default: 80)