Set Length Range For Aim-128 - Newland NLS-FR40 User Manual

【Enter Setup】

Set Length Range for AIM-128

The scanner can be configured to only decode AIM-128 barcodes with lengths that fall between (inclusive) the minimum
and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
【Set the Minimum Length (Default: 1)】
If minimum length is set to be greater than maximum length, the scanner only decodes AIM-128 barcodes
with either the minimum or maximum length. If minimum length is same as maximum length, only Code
128 barcodes with that length are to be decoded.
Set the scanner to decode AIM-128 barcodes containing between 8 and 12 characters:
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
3. Scan the numeric barcode "8".
4. Scan the Save barcode.
5. Scan the Set the Maximum Length barcode.
6. Scan the numeric barcode "1".
7. Scan the numeric barcode "2".
8. Scan the Save barcode.
9. Scan the Exit Setup barcode.
**【Exit Setup】
【Set the Maximum Length (Default: 127)】
42