Loading Postcards In Tray 5 (Bypass) - Xerox Versant 3100 Press User Manual

4. Install the postcard bracket:
a) Sit the bracket on the locating pins on the upper frame and in the grooves on
the bottom of the tray.
b) Tighten the thumb screw so it locks the postcard bracket in place.
5. Load the postcard stock SEF and against the right side of the tray.
6. Adjust the paper guides against the stock.
7. Close the paper tray and confirm the new settings at the print server.
8. Run your print job.
9. Upon completion of your print job, remove the postcard stock and the postcard
bracket from the tray.
10. Store the postcard bracket by inserting it into the storage area on the left side of the
tray ( ) and tightening the screw (

Loading Postcards in Tray 5 (Bypass)

Load postcards SEF, with the side to be printed on facing up.
® ®
Xerox Versant 3100 Press
User Guide
).
Paper and Media
5-31