Xerox Versant 3100 Press User Manual page 74

Paper and Media
2. Move the paper guides out to their largest position.
3. Locate the Envelope Support Kit.
4. Install the L-shape envelope bracket:
a) Sit the bracket on the locating pins on the upper frame and in the grooves on
the bottom of the tray.
b) Tighten the thumb screw so it locks the L-shape envelope bracket in place.
5. Locate the larger of the plastic pieces and place it in the bottom of the tray so that
it fits around the ends of the inboard paper guide.
6. Locate the shorter plastic piece install it in the tray:
a) Place the shorter plastic piece in the bottom of the tray so that it fits along the
right side of the tray and into the corner, to the right of the envelope bracket
that you installed.
b) Place the magnet at the end of the piece into the corner of the tray and facing
down.
5-36
® ®
Xerox Versant 3100 Press
User Guide