Xerox Versant 3100 Press User Manual page 17

Item Name
Number
4 Machine Status button
5 Touch Screen
6 Log In / Out button
7 Language button
8 Power Saver button
9 Numeric Keypad
10 Cancel Entry button
11 Clear All button
12 Stop button
13 Start button
14 Press Status Lights
® ®
Xerox Versant 3100 Press
User Guide
Description
Use to check the press configuration, the software version,
the press billing meter and counter information, and to
access and print job history or error reports.
Directly touch the screen to select and set features. Dis-
plays instructional and informational messages, fault
clearance procedures and general press information.
Use to log in and out of Administrator mode or Authentic-
ation mode with user ID and password.
Use to select a different language for the touch screen
options.
Use this button if the press has been inactive and the touch
screen is dark (system is in Energy Saver mode). This button
manually exits the system from Energy Saver mode; it does
not place the press in Energy Save mode.
Use to enter alphanumeric characters. The 'C' Cancel Entry
cancels the previous entry made on the numeric keypad.
Use this button to cancel the previous entry made on the
numeric keypad.
Use this button to return all selections to the same state
as when the press was powered on. Press once to clear a
current entry. Press twice to return to default settings.
Press to stop and pause the print job in progress.
Press to start and print a selected report. Also used by the
Customer Service Engineer during diagnostic routine pro-
cedures.
The three indicator lights that identify: data transmission
in progress, the press is experiencing an error, and main
power is on.
Getting Started
2-5